Skim milk powder reconstituted to 8.44% TS, 9.65% TS and 10.84% TS respectively was used for investigation. Untreated milk and milk heat treated at 85ºC/20 min and 90ºC/10 min, respectively, were used for the investigation. Milk was inoculated with 2.5% of yogurt culture (containing Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus in the ratio 1:1) at 43ºC.

The influence of milk dry matter (DM) content (8.20%, 9.27% and 10.28%) and applied heat treatments (untreated milk and milk heat-treated at 90°C/10’) on the viscosity of set-style yogurt and acid casein gel gained by acidification with GDL (glucono-d-lactone) has been investigated. Viscosity was measured during the time of 3 minutes at constant speed of spindle rotation of 20 rpm. The results have shown that yogurt samples produced from untreated milk had higher viscosity values than samples produced from heat-treated milk.

The influence of different drying temperatures of curd particles in order to obtain curd particles with chemical composition characteristic for Dutch-type semi-hard cheeses was investigated. The experiments were performed with heat-treated milk at 87ºC for 10 minutes to induce chemical interaction between casein and serum proteins and to form the co-called co aggregates. The curd particles were dried at 42ºC and 45ºC for 60 minutes and two types of curd, named curd A and curd B were formed afterwards.

The composition of curd A and curd B was investigated as influenced by the technological process known as curd washing after removing 1/3 or 1/2 of whey and replacing by the same volume of water at the drying temperatures of 42ºC and 45ºC, respectively. Milk used for experiments was heat-treated at 87ºC/10 min, during which the chemical complex between casein and whey proteins (milk protein co aggregates) was formed.

The composition of curd A and curd B was investigated as influenced by the technological process known as curd washing after removing 1/3 or 1/2 of whey and replacing by the same volume of water at the drying temperatures of 42ºC and 45ºC, respectively. Milk used for experiments was heat-treated at 87ºC/10 min, during which the chemical complex between casein and whey proteins (milk protein co aggregates) was formed. It is shown that the applied drying temperatures of 42ºC (curd A) and 45ºC (curd B) do not have significant influence on the curd composition.

Skim milk was reconstituted to obtain milk with 8.44% DM, which was standardized with demineralized whey powder (DWP) to obtain milk sample A (9.71% DM) and milk sample B (10.75% DM). Milk samples were heat treated at 85ºC/20 min and 90ºC/10 min, respectively. Untreated milk was used as control. Milk samples were inoculated with 2.5% of commercial yogurt culture (containing Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus in the ratio 1:1) at 43ºC. Samples were incubated until pH 4.6 was reached.

Reconstituted skim milk with 8.01% DM was standardized with 3% skim milk powder and with 3% demineralized whey powder (DWP), respectively. Gained milk samples are named as 8%, 11% and 8%+3%DWP. All samples were heat treated at 85ºC/10 min, 90ºC/10 min and 95ºC/10 min, respectively. Untreated milk was used as control. Milk samples were coagulated by glucono-d-lactone (GDL) at the temperature of 45ºC until pH 4.60 was reached.

Skim milk powder was reconstituted to obtain milk A (with 8.44% TS). Milk sample A was standardized with different amounts of demineralized whey powder (DWP) to obtain milk B (with 9.71% TS) and milk C (with 10.75% TS). Milk samples were heat treated at 85ºC/20 min and 90ºC/10 min, respectively. Untreated milk was used as control. Milk samples were inoculated with 2.5% of commercial yogurt culture (containing Lactobacillus delbrueckii subsp.

The influence of pH (6.5 and 5.8), amount of added CaCl₂ (0, 200 and 400 mg/l)), coagulation temperature (30ºC and 35ºC) and heat treatment of milk (65ºC/30 min and 87ºC/10 min) on the rate of rennet induced milk coagulation (s) were investigated. The time (s) from rennet addition to onset of gelation (as indicated by the first visible floccules) was measured.

Skim milk powder was reconstituted to obtain milk A (with 8.01% TS). Milk A was standardized with 3% of skim milk powder and 3% of demineralized whey powder (DWP), respectively, to obtain milk B (with 11.15% TS) and milk C (with 11.10% TS). Milk samples were heat treated at 85ºC/10 min, 90ºC/10 min and 95ºC/10 min, respectively. Untreated milk was used as control.